Back to products
OPTIcoat ST22+ - Spin Coating

Active Product

OPTIcoat ST22+ - Spin Coating

Spin coating system with Covered Chuck technology

OPTIcoatSemi automatic equipment

Processes

CoatingSpinning

Maximum product diameter

Ø 200 mm
Request information

OPTIcoat ST22+

Stand-Alone Spin Coating System with "Covered Chuck" within process:

  • Stand - Alone Spin Coating System with "Covered Chuck" technology with Hotplate for Wafers up to Ø 8" (Ø 200 mm) and substrates up to 6" x 6" (150 mm x 150 mm), for traditional open bowl or covered chuck spinning and advanced proximity baking

System configuration

  • Stand - Alone cabinet with all process modules integrated
  • Spinner system with "Covered Chuck" technology and automatic substrate pin lift
  • Multi piece process bowl (easily dismountable for cleaning purposes) with splash ring
  • Hotplate OPTIhot HB 20+ with programmable lifting pins (proximity)for 2" - 8" Wafer
  • Programmable Nitrogen (N2) blow
  • Industrial full-colour touchscreen HMI for each system
  • USB interface
  • PC-based recipe management and backup software
  • Digital documentation and operating manuals available for download
  • Requires at least one chuck (Not included !)

Technical data

  • Voltage: UAC= 3 x 400 V / N / PE / 50 Hz (60 Hz) / 16A
  • Motor-Speed: 1 up to 10,000rpm in 1rpm steps
  • Motor-Acceleration ramp: 1 up to 50,000 rpm/sec in steps 1rpm/sec
  • Spinning time: 1 up to 999 s - Adjustable in 0.1 s steps
  • Substrate size: Up to Ø 8" (Ø 200 mm) or 6" x 6" (150 mm x 150 mm)
  • Process bowl: Standard made of Polypropylene (PP)
  • Process exhaust: Outer diameter OD 110 mm, 200m3/h
  • Cabinet exhaust #1: Outer diameter OD 110 mm, 200m3/h
  • Cabinet / HP exhaust #2: Outer diameter OD 110 mm, 200m3/h
  • Drain: 5 liter waste tank and high-level sensor, inside the cabinet
  • Compressed air: Clean Dry Air (CDA) 8 ± 2 bar
  • Vacuum: -0.8 ± 0.2 bar
  • Nitrogen (N2) Optional: 4.0 ± 0.5 bar
  • CE marked system

Hotplate:

  • Temperature range: Up to 300°C - Adjustable in 0.1°C steps
  • Hotplate time: 1 up to 999 s - Adjustable in 0.1 s steps
  • Proximity: Programmable in 0.1 mm steps
  • For Wafer: Up to Ø 8" (Ø 200 mm)
  • For Substrate: Up to 6" x 6" (150 mm x 150 mm)
  • Lifting pins: For Ø 2" up to Ø 8"

Chuck: Option
Dispense: Option
Nozzle: Option
Hotplate: Option